SUSPA gas springs product range
SUSPA gas springs are used to offset weight or to
support the activation of moving components. Pushing, lifting,
lowering, pulling and positioning in a controlled manner is possible
with SUSPA gas springs. Compared to other compression spring parts such
as plate springs, rubber springs or coil springs, SUSPA gas springs
differ by their flat spring characteristics (low force increase), the
largest possible pretensioning, settable extension speed, low weight and
highly modifiable forces for the same dimensions. In addition, SUSPA
offers its customers a range of special functions and special fittings
when designing their gas springs.
SUSPA gas springs have the dimensions listed in the table below as standard: (Gas spring product catalogue)
Type
|
Extension force (N)
|
max. stroke (mm)
|
Piston rod (mm)
|
Tube (mm)
|
|---|
16-1
|
50-400
|
150
|
6
|
15
|
16-2
|
80-750
|
250
|
8
|
18
|
16-4
|
100-1.200
|
395
|
10
|
22
|
16-6
|
200-2.000
|
500
|
14
|
28
|
If
a geometry is required that cannot be found in the table, then please
get in touch with us. For mini gas springs in particular (tube diameter
less than 15 mm or piston rod diameter less than 6 mm) it is essential
to look at the individual application. The same is true of gas springs
with very large dimensions i.e. tube diameter greater than 28 mm and
piston rod diameter greater than 14 mm. In these cases please get in
touch with us so that we can advise you accordingly.
Gas springs
The millionfold produced SUSPA gas spring.
Lockable gas springs
The proven solution with stepless locking in any position.
Dampers
Optimal damping of shocks and vibrations.
Height adjustment
Pneumatic, hydraulic and electric motor driven height adjustment for tables and work surfaces.
Car adjustment systems
Adjustable spoilers, seats, doors and flaps are just a few of the many applications.
Crash Management
Systems to protect passengers, pedestrians and vehicles.
Pemesanan Call : 0818-0807-9644
